Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

How to obtain antique copper finish on painted cast iron

Hi, I have some dummy spade hinges with a black finish that appears enameled over cast iron. I need to refinish it so it matches my front door hardware/lockset which is "antique copper" finish.

Derrick Chan
hobbyist - Mill Valley, California, USA
July 7, 2009

July 8, 2009

Hi, Derrick. Assuming paint will stick, paint them brown, then paint them copper color and wipe the copper color away from the edges and high points before or after it dries.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: