Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

What is MIL-F-14072 finish P211C?

We are quoting a part that has finish spec of Finish P211C PER SPEC MIL-F-14072. Any help would be appreciated.

Tom Cooch
Tool And Die Shop - Pittsford, Michigan, USA
May 8, 2009

Hi, Tom. It looks to me like 211C is a discontinued number and it should be 211M. But it's a long spec (60 pages) that really needs a careful read rather than a quick impression. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
May 13, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: