No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Remove clear coat from the head light lens

2006

I need to remove clear coat from the head light lens of my car it left a dull finish. I have tried acetone ⇦ this on eBay or Amazon [affil links] Warning! highly Flammable! , lacquer thinner ⇦ this on eBay or Amazon [affil links] Warning! highly flammable! , paint remover.

Carlo Falzone
- Fredonia, Wisconsin

Most late model headlight lenses are plastic, not glass, Carlo. I'd probably be surprised if they could survive acetone, lacquer thinner ⇦ this on eBay or Amazon [affil links] Warning! highly flammable! , and paint remover without being damaged by them and leaving a dull finish. Sorry.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: