No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

How to produce Galvalume?

We are having hot dip galvanizing line and we are looking for galvalume product so we are in need for all these requirements such as:
- Bath( Pot) material type, stainless or ceramic or .....
- Pot chemistry composition
- Process conditions including process components
- operation condition

Hazem Gad
steel - Egypt
April 8, 2009

Hi, Hazem. Galvalume® is a 55% aluminum / 45% zinc alloy for application by hot-dipping in a fashion similar to hot-dip galvanizing. But it is a registered trademark, a patented process, and licensed to those shops which wish to apply it. You can get further information about Galvalume at www.steelroofing.com. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
April 12, 2009

March 27, 2012

Dear sir,

I like to know more about Galvalume and its application.
Is it different from HDG, application wise?

Sunil Kumar
- Gurgaon, India

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: