Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Surface finishing of aluminium sheet for light fixture reflector

Would like to know the process used for finishing on aluminium sheet in lighting fixture reflector.
the sample has a mirror like coating on one side .

Anuj Raheja
manufacturing - Gurgaon, Haryana, India
April 10, 2009

Hi, Anuj. A number of different technologies are available depending upon what kind of fixture you are speaking of, but it's fairly common to bright dip the aluminum and then anodize it for use as a reflector.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
April 10, 2009

51841

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: