Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Need Mil-A-8625, Type III, Class 2 dyed Black (matte), ATF Type 7 License holders preferred

We have a volume of parts coming online in the Muncie, IN area that require Mil-a-8625, Type III, Class 2 finish. Some of these parts are ATF registered receivers, so if you have an ATF Type 7 License that makes you a preferred supplier. The closer you are to Muncie, IN the better. Volume will be north of 5,000 pieces a month.

Michael Blank
Firearms Manufacturer - Muncie, Indiana, USA
March 25, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: