Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Matte tin finish vs bright tin finish [New York]

Other than the obvious difference between a bright tin plate finish and a matte tin plate finish, what are the corrosion resistance, electrical resistance and mechanical differences between the two finishes?

Thomas Nedlik
Failure Analysis Engineer - Johnson City, NY, USA
February 26, 2009

February 26, 2009

Hi, Thomas. The big difference is that the matte tin is more solderable because it does not have organic brighteners to interfere.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

March 3, 2009

SOME THEORIES CLAIM THAT MATTE TIN HAS LESS WHISKERS PHENOMENON
BECAUSE HE HAS LESS TENSION STRESS.
ANYWAY IS EASIER TO SOLDER

Ricardo Burstein
Bnei Berak, Israel

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: