Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Looking for best paperback book for the powder coating beginner

I need to find one preferable new paperback copy of a book covering the above mentioned subject. If possible the cheapest one available. That is available from a seller near Overland Park, Kansas. URGENT PLEASE.

Calvin Rose
powder coating of elevator doors- Overland Park, Kansas
February 14, 2009

Hi, Calvin. It's always hard to recommend the "one best" of anything, but I'd probably suggest "Powder Coating" from the CCAI bookstore at https://www.ccaiweb.com/bookstore/bookstore.html,

$49 for non-members.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
February 24, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: