Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Company that can coat and hone a rotary housing

John:
I too am interested in Nikisil coating on a Wankel engine housing. My hovercraft has a similar engine to your norton Sachs KM914.

I am having the rotor coated with ceramic, but the plater (fireball) does not think the ceramic coating would stand up to the constant rubbing of the apex seals.

Does anyone know of a company that can coat and hone a rotary housing?

Daniel

Daniel Turkstra
- Toronto, Ontario, Canada
February 3, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: