Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Zinc Coating 210 litre / 55 gallon drums

I am looking to set up a 220 liter/ 55 gallon drum factory, instead of painting the drums we want to zinc plate them.
Is there anybody doing this, can one seam-weld zinc plated sheet or do we need to make up drum bodies and plate after welding?
How do I go about setting up a Zinc plant as I have no knowledge re equipment and consumables etc?
Drums destined for the fruit-pulp industry, is zinc coating toxic for foodstuffs ?
Any advise or assistance will be greatly appreciated

Peter Krichel
Drum manufacturer - Johannesburg Gauteng South Africa
January 23, 2009

Hi, Peter. Zinc is not a food-safe metal. Sorry, but this idea is not a promising one.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
January 23, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: