Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Stainless Steel....Black Oxide Finish

I was inquiring to see if and where I can purchase .093 dia. stainless steel rods with a black oxide finish. Preferably in 6 ft lengths. I would need approx. 100-500 pieces. at a time. Please advise.
Thanks, Doug

Doug Tolkason
Toolmaker - Middleboro, Massachusetts
October 16, 2008

Hi, Doug. Black oxide is a fairly unusual finish for stainless, to the extent that I doubt that you will find a steel warehouse that stocks it. Rather, I think you go to Ryerson or another warehouse for the rod in 6-foot lengths, then contract with a plating shop to blacken it.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
October 17, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: