Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Repairing damaged/oxidized Silver Coatings on Connectors

We have connectors .they are coatings with silver and damage , oxidized and we are looking for solution to repair them.

Amir Gholampoor
credit card co. - Shiraz Fars, Iran
October 14, 2008

Hi, Amir. The general rule is that you don't repair damaged plating, you strip the coating and replate the item. If there are special circumstances at play that might change that approach, please give us the details. Thanks.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
October 14, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: