Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Etching Time for Aluminum Extrusions?

September 16, 2008

Please give me the answer for the below question --

What is the etching time for matte finish in Aluminium extrusion industry?

regards,

Mohammed Mohaideen
product designer - Dubai , UAE

September 22, 2008

Hi, Mohammed. It will vary depending on the strength of the etch, the alloy being etched, and the degree of matte finish. But to give you an order of magnitude, an etch is generally something like 1 to 2 minutes.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: