Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

What are the Extraction or Recovery Processes for Gold, Silver and Copper

September 11, 2008

Dear Friends

Will you help me to find out different extraction or recovery processes available for gold, silver and copper? This for a study project purpose. I will be thankful for your help!

Regards

S Waath
Study purpose - India

"Recovery and Refining Of precious Metals"
by C.W. Ammen
refining_ammen

on AbeBooks

or eBay or

Amazon

(affil links)

Hi, S. Your subject embraces everything from mining to recycling of three different metals. You might want to narrow it down by 99.9 percent before you start writing your project or your thesis won't fit on a single shelf in the library :-)

Please pick an individual subject like recovery of silver from X-ray films, or recovery of copper from defective printed wiring boards, or recovery of gold from abandoned mines by cyanide leaching, and you will still be able to write a report that is easily of book length. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
September , 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: