Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Passivate Titanium Implants

Q. My Engineers tell me that anodizing our titanium implants gives us the same passivation as ASTM F86 does. Is this true? Do I need to have my implants passivated per ASTM F86 with an anodized surface finish?

Mark Wilkinson
Product designer - Austin, Texas
August 1, 2008

A. Hi, Mark. ASTM F86 is a specification for marking implants, and includes cleaning and electropolishing requirements, etc. I don't quite understand your question, but I don't think I would make an implant that did not fully comply with recognized standards like F86.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: