No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

What are the effects of a titanium frame MOX anode in trivalent chrome bath

I would like to know what will happen to a trivalent bath if titanium is used to frame a MOX anode and the titanium is immersed in the bath. Can I do a test in hull cell and place titanium put Current through and measure the oxidised titanium in trivalent chrome?

Marilyn Kwok
chemical plater - Singapore
July 31, 2008

Hi, Marilyn. Very similar topics are under discussion on letter 50922. You might consult it for some good insights. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
February 20, 2009

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: