No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Silver plated wrist watch dials get brown spots

July 25, 2008

My articles are silver plated wrist watch dials.
1. base metal is brass
2.next is nickel plating
3.silver plating
during this all plating procees like that degreasing, activation, rinsing, antitarnish, etc. are done properly.
after that dial is coated with color or lacquer.
we are facing a problem after few months some quantity of dials become black/brown spotted.
can someone suggest about the problem ?

Satish Rathi
plating shop employee - Jaipur, Rajasthan, India

July 25, 2008

Hi, Satish. Any chance it's a delayed cyanide bleedout? Try alternating hot and cold rinsing after silver plating and before the antitarnish.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: