Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ
The authoritative public forum
for Metal Finishing since 1989
-----
Small batch Incineration of Gold-loaded anion exchange resin
I am a metallurgist experimenting "gold and silver extraction" from a Anion Exchange resin which was loaded with the water of an old mine stream.
I have spent many hours in the internet looking for a "Resin Incineration procedure"
My Laboratory has a Muffle Furnace good for 2000ªF.. I want to avoid the gold losses
that may occur in the off gasses and have not find reliable information and know-how
to ascertain the maximum Au/Ag recovery from the ashes.
You assistance regarding the above subject shall be appreciated.
metallurgist - Guatemala
July 17, 2008
July 27, 2011
Hi there
Did you ever find a suitable furnace for resin incineration for silver and gold laden resin? As I am also looking for the same
Regards
Adam
- Dubai UAE
(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)
Q, A, or Comment on THIS thread -or- Start a NEW Thread
Q, A, or Comment on THIS thread -or- Start a NEW Thread