No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

International Military Corrosion Standards

July 15, 2008

We will produce a Military Shelter for one of our client.
The base material and Aluminium and it will be coated with paint.
Do you know any Military (International)Testing Standards for corrosion, thickness etc?

Kerem Topcu
engineer - Turkey

Hi, Kerem. An international military standard sounds like an oxymoron ("If you're going to shoot at me, I want to make sure your bullets are up to snuff to penetrate my shelter. Fair is fair").

Nonetheless, all American military standards are available on the internet at assist.daps.dla.mil/quicksearch and it's all free; when you download them your bill is sent to the American public. If you use the various search terms you have already mentioned, you'll quickly find the specs you need.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
July 15, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: