No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

White bleach stains on coloured enamel bath

My lovely old bath has been ruined by white stains. They disfigure the coloured enamel. My builder says that these are bleach stains (I rented out the house for a while). These stains or marks disappear completely when the bath is wet and reappear slowly as the bath dries. I have tried many, Many products in an attempt to remove these, but no luck so far. Can anyone please help?

Jennifer Kane
buyer - London, England
July 6, 2008

Hi, Jennifer. If the stains disappear when wet, it's probably not a matter of color so much as surface roughness (the rough surface scatters the light differently than the smooth adjacent surface). Try a clearcoat like Everbrite [a finishing.com supporting advertiser]. To slightly simplify what they say, if it looks good wet, it will look good with the clearcoat. Let us know if it works.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
July 9, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: