No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Conversion coating without painting

Can we use conversion coating without painting in wet atmosphere?
for example on the gritting of platform.

Majid Shahrjerdi
- Iran
June 11, 2008

Hi, Majid. "Conversion coating" is a context-dependent term. It can mean, among other things, phosphatizing of steel or chromating of aluminum. Chromated aluminum does not require painting. However, phosphatized steel without paint is rarely considered a suitable coating.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
June 11, 2008

My opinion is that a conversion coating is a little better than nothing in a wet atmosphere and is not recommended for an area of high wear like a scaffold as it will wear off rapidly.

James Watts
- Navarre, Florida
June 12, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: