Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Wastewater treatment for zinc process

I am getting ready to install a alkaline and acid zinc line with a clear and yellow chromate. I currently have an operational Alodine and anodize line in the same facility.

My question is can I use the same wastewater system for the zinc process that I am currently using for the Alodine/anodize processes or would it have an adverse affect on the waste treatment system.

steve adams
- cedar city, Utah , usa
2000

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: