Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Best product to strip Nickel from Copper

Anyone have any suggestions on the best product to strip nickel from copper.

Many Thanks in Advance !

Michael Coons
Buyer & Shop Employee - Roseville, California
April 3, 2008

Hi, Michael. We don't do brand-to-brand comparisons here, we talk about generic and technical issues. But there are proprietary nickel strippers which work well, and one brand is Metalx (Ronatec.us) [a finishing.com supporting advertiser]. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
April 4, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: