Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Painting aluminum boat

I have a 16 foot aluminum boat that I want to re paint. Most of the paint is adherent to the aluminum. There are some scratches down to the aluminum and spots where the paint is off. My question is how do I prepare the bare spots and painted spots? Can I prime or etch over the adherent paint or just the bare spots? Any help would be appreciated.

Mike Dufty
- New Baltimore, Michigan, USA
March 19, 2008

There is a very long and detailed thread, letter 10712, that should answer your questions, Mike.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
March 28, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: