Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Cathode material for aluminum anodizing

I am trying to anodize aluminum 2024 for a project. I cannot seem to find what cathode should be used when anodizing this material. Can someone lead me to what the cathode should be?

Alex Herrera
student researcher - San Luis Obispo, California, USA
February 14, 2008

Patient searching for "anodizing cathode" will bring up several threads on this, Alex. Lead or 6063T6 aluminum. For a short student project, 6061 or 6063 will probably be fine. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
February 15, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: