Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

How to check ductility and adhesion of EN on aluminium

I AM INTERESTED TO KNOW THE TEST METHOS TO CHECK THE ADHESION AND DUCTILITY OF ELECTROLESS NICKEL ON ALUMINIUM ALLOY 6061T6 .

SANDEEP PATEL
plating shop incharge - Ahmedabad, INDIA
2007

That is prescribed by the OEM that you are making the parts for. There is no universal test procedure. Even common tests have different requirements for the outcome with different companies.

James Watts
- Navarre, Florida
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: