Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Prepping chrome wheels for powder coating

have a set of motorcyle wheels that are chrome. I am want to either paint or powdercoat them. do I need to have the chrome stripped off of them or can I just spray it.

Jeremy Wilson
buyer - Whiteland, Indiana, USA
2007

Paint (or powder) won't stick to chrome well. Some powder coaters report good results with a light sandblast, but it may be necessary to acquire some skill at it (have never actually done it myself).

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: