Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

How to powder coat teflon onto aluminum

I have a manufactured product, aluminum alloy, I would like to coat with Teflon for ease of cleaning. I have a method of powder coating my product, but I was wondering how Teflon is applied and if I could apply Teflon with the powder coating equipment?

Thank you,

Brett Taylor
Product Designer - Norman Park, Georgia, USA.
2007

Heavy powder coatings like teflon are usually applied from a fluidized bed rather than electrostatic spray, but the curing process is similar.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: