Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Iron Titration in passivation bath

Hi Everyone,

I am interested in finding a procedure for determining iron content in a passivation bath.
The make-up of the bath is 25% Nitric and 2-3% Sodium Dichromate.

Thank-you in advance

Micheline Forth
Finishing Company - Savannah, GA, USA
2007

Hi -

Fe+3 can be done by titration pretty easily. Look for info on this site. Total iron can be done nicely with ICP.

Terry Tomt
- Auburn, Washington
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: