Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Racking stainless steel parts on alum racks

I work in a plating shop and I handle all of the stainless steel parts. Some customers want their parts racked during the nitric bath instead of being placed in baskets, due to dents and dings. But every time I rack parts they suffer from flash attack. What can I do to stop this from happening?

Fernando Burrello Jr
plating shop employee - Deer Park, N.Y., US
2007

Have you tried stainless racks instead of aluminum?

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: