Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Restoring 1917 Bronze Plaques From Old Bridge

My company is restoring an old bridge on the Tennessee River. We have 3 large bronze plaques about 3' x 6' that need to be restored. They cannot be removed from the concrete. The lettering looks fair. How should we do this? Any suggestions.

Jerry Britton
Britton Bridge, LLC - Knoxville, Tennessee
2007

Try conservation OnLine webpages-that is job for professional metal conservator!Good luck!(http://palimpsest.stanford.edu/)

Goran Budija
- Cerovski vrh Croatia
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: