Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Refinish Aluminum A/C control yoke

I have an aluminum yoke from my Mooney A/C that needs to be refinished. It has the remnants of a glossy black finish covering about 75% of its surface. The remaining 25% is down to bare metal.

What would you recommend for preparation prior to finishing and what paint or coating would you recommend to restore a durable black glossy finish?

Charles Ormsby
Pilot - North Andover, Massachusetts, USA
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: