No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Iron Test for Passivation Bath

Hi,
I'm looking for some help with an iron test to determine if my passivation bath needs to be changed.
We are starting a passivation line and this seems to be the only test I can't get my hands on.
I would appreciate anyone's help.

Thank-you,

Micheline Forth
metal finishing - Savannah, Georgia, USA
2006

You may have already thought of it, but an amazing amount of topics have been covered repeatedly over the years at this website and all of that information is still available in the archived letters. Use the search engine to see if your question has already been answered, and give special attention to letters 57140 and 36868 - my notes indicate that these two might have the answer your looking for.

Good luck.

Jim Gorsich
Compton, California, USA
2006

www.finishing.com is made possible by supporting advertisers ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: