No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Corrosion of Gold, Frankincense and Myrrh

OK sorry guys, just a line to hook the usual (suspects) contributors.
A Merry Christmas to all you guys. Especially to, (and apologies in advance for any missed names) Ted of course, but also Trevor C, Goran B, James W, Ken V, Freeman N, Sheldon T, Ray K and Mark B etc.
Is it time to resurrect the rice-pulling coin saga?
Regards and thanks for all the advice and enjoyment
Martin Rich

Martin Rich
Ship Repair - Plymouth UK
2006

2006

Thank you, Martin, we enjoy your postings.

The names you will run into most frequently depends on the finishing categories you most frequently haunt. There are about another fifty "regulars" whose postings we consistently appreciate and to whom we extend our holiday good wishes. Thanks for helping me hold the world's best job.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: