No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Hard chrome plating s g cast iron

adv.

I would like to know what pre treatments are required before plating sg cast iron i.e., if we have to etch anodically or cathodically in sulfuric acid and the concentration of acid.

thank you,

Bommu Vijay Kumar
plating shop owner - Chennai, Tamil Nadu, India
2006

Cast iron you have only to prepare mechanically, i.e. by high speed polish, and then put it in the chrome bath under plating current, no reverse current allowed.

Arik Lin
noble metals - Tel Aviv, Israel
2007

adv.

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: