Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Powder primer

My company is interested in applying primer on our parts that are powder coated. I'm interested in finding a primer that will allow the top coat to be applied on top of a non-cured primer and cured together. I'm aware that most primers need to be semi-cured before application of top coat, but because of size and time restraints we would like to do everything at one time. My local supplier does not have anything like this, does anyone know of a supplier that has a primer that will allow powder on powder application? We are currently using a TGIC top coat.

Timothy D. Grayson
- Redmond, Washington
2000

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: