No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Applying colour to small soldered brass components

2006

I would like to use the technique of powder coating to apply colour to small detailed filigree brass findings that are soldered using a low temperature solder. However I have been told that due to the nature of powder coat, the thickness of paint will cover the detail of the filigree.. Basically I do not want to use traditional methods of electroplating as only a small number of colours can be achieved but the process of charging the paint appeals to me as it would reach all areas of the brass...can anyone help me......

Andy Farrow
costume jeweller - London, United Kingdom

The product sounds like a perfect candidate for electrophoretic lacquering, Andy.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: