No cost, No passwords, No popup ads, No AI
-- just hobbyists & pros helping each other
we earn from 'affiliate link' purchases

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Appropriate chemicals for electropolishing

Hi! I will do experiment on electrolytic polishing of copper for my undergraduate thesis.. I just want to know the appropriate chemicals and their concentration to treat this metal.. I will try 75% phosphoric acid and 25% sulfuric acid, I read they are usually used for most metals, but I am not yet sure if they give satisfactory results... Am I using the proper chemicals, if not, can you suggest what's suitable? I will greatly appreciate your answers..

Glady Tajonera
student at Univ. of the Philippines, College of Engineering - Quezon City, Philippines
2006

Electroplating Engineering Handbook ⇦ this on eBay, AbeBooks, or Amazon [affil links] has a chapter on electropolishing that I believe you will find very informative, Glady.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: