Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Screw plating process

Hi we are precision screw manufacturing company and we a have a student who wants to start up a project of plating the screws. Can I have informations on basic plating process and what are the chemicals that are used.

Thank you,

Devandran
Nemco Fasteners - Shah Alam, Selangor and Malaysia
2006

Please have him start with the Metal Finishing Guidebook. It is inexpensive, broad in scope, and highly topical. There are so many issues, like safety, environmental responsibility, acid zinc vs. alkaline zinc vs. alloy zinc, chromating in compliance with RoHS, etc., that it would be foolish for him to try to start without at least one good book under his belt. Good luck!

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: