Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

MIL-C-13924 vs AMS 2485

What is difference between these specs?

Daryl Basham
metal fabricator - Elk Grove Village, Illinois
2006

About 22 years -- at least, get MIL-DTL-13924 [on DLA]D.
Don't know firsthand, but believe AMS2485 is more specific regarding QC sampling and inspection.

Ken Vlach [deceased]
- Goleta, California

Finishing.com honored Ken for his countless carefully researched responses. He passed away May 14, 2015.
Rest in peace, Ken. Thank you for your hard work which the finishing world, and we at finishing.com, continue to benefit from.
2006

MIL-C-13924 (now MIL-DTL-13924D) specifies a chromic acid sealer after processing (Class 1, 2, and 4).

AMS2485J does not include the chromic acid treatment.

Andrejs Adamovics
- Stockton, California
February 4, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: