Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Re tinning a pot

Is there a kit I can buy to re tin my copper pot?

Genie Murphy
- Mclean, Virginia
2006

Buy some pure tin and use tallow or rosin as flux (proprietary non corrosive fluxes are good too), metal must be oxide and grease free. Good luck!

Goran Budija
- Cerovski vrh Croatia
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: