No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Tantalum polishing

We are a watch making company from Hong Kong. We intend to use tantalum as the material for the watch case. Can anybody tell us whether it is possible to:
1. polish the case like what we are dong on Stainless Steel 316L-
2. making screw back-
3. fine cut/polish some of the measurement to 0.1 mm-

Ashley K C Lung
- Hong Kong, PRC
2006

yes, yes, yes. To all of your questions.

adv.
We have developed tantalum polishing technology, well controllable, safe for workers and environment. Contact us if interested

Anna Berkovich
Russamer Lab

Pittsburgh, Pennsylvania

2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: