Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Cleaning pieces after the polishing process

We are manufacturers of different parts like pins, key holders and something like these but after the manufacturing process, specifically after polishing it, we need to remove that on hard-to-reach surfaces. We make it manually but now we are making a tank which will hold the pieces to clean. The pieces generally are made of metal like aluminium or steel. The problem is the chemical to be used. It will pumped in the tank but a low pressure. What chemical could be used. Thanks for the assistance that we will receive.

Samuel Villa
- Estado de Mexico, Mexico
1999

Hi Samuel, Maybe Ultrasonics can help? Mark

Mark Camilleri
- Malta
1999

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: