Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Removal of Borates from Waste water

Hi... I see that the subject has been brought up already. We use a compound consisting mainly of potassium fluoroborate and other borates as soldering flux. The MSDS of this products says that the product should be treated with lime before letting off into water bodies. To my knowledge.. this will precipitate calcium fluoride but what about the borates?. Will it precipitate fluoroborate as well? If not.. how can I get rid of the borates in my waste water

Mark Camilleri
- Malta
1999

Hi, Mark. Yes, this is a popular subject. In fact we have many threads on Boron in Wastewater listed on our FAQ page. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
February 27, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: