Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Stripping & scuffing of guns before bluing?

adv.

Q. Does a gun have to be stripped and scuffed before bluing

James Hodge
- Broken Arrow, Oklahoma.
2005

2005

A. Hi James. I'm not sure quite what you mean by "stripped and scuffed", but any nickel plating or other plating must be removed.

The bare steel can be "blued" whether it is high polished or bead blasted, but bead blasted and other rough surfaces tend to look black rather than blue, and very highly polished surfaces will look a more of a jewel-blue color.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: