No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Custom color/plating of mild steel bolts

I am a motorcycle enthusiast and enjoy customizing my motorcycle. I would like to plate all of the exterior bolts to match the color of my bike. These bolts are made of mild steel and most are torx drive button heads, for my application the actual head is all I am concerned with having a nice finish. I have heard that a zinc chromate finish is available in a blue color but would like some information about this process and if custom shades of blue could be achieved with this process.

Aaron D. Link
engineer - Tipp City, Ohio
2005

Dyed chromate films are pastel and will not match the vibrant color of paint. The heads of the bolts should probably be painted.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: