No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Refinishing pitted titanium golf clubs

I FIND MYSELF REFINISHING TITANIUM GOLF CLUBS THESE DAYS AND WAS WONDERING IF ANYONE HAS ANY ADVICE ON HOW TO PROPERLY PREPARE A SUBSTRATE IN WHICH TO TOP COAT. THE MAIN PROBLEM I HAVE IS WITH THE PITTING OF THE CLUBS AFTER BLASTING WITH GLASS. IS THERE A PRIMER/FILLER THAT CAN BE USED TO FILL THE HOLES? THE HOLES THEMSELVES ARE NOT VERY BIG AT ALL BUT NONE-THE-LESS,THEY ARE PROBLEMATIC. I'M NOW USING A WASH PRIMER. IT DOES NOTHING FOR PIN HOLES. ANY ADVICE WOULD BE APPRECIATED.

RICHARD ORONA
Golf Club Refinisher - AUSTIN, TEXAS
2005

2005

We can suggest the alternative way of electropolishing golf clubs in safe electrolyte. Contact us for more information. Photo of polished golf club is attached.

37589

Anna Berkovich
Russamer Lab

Pittsburgh, Pennsylvania

adv.
ti anodizing

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: