Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Zinc Electrolysis

2005

In Zinc Electrolysis What happens if the Copper is more than 0.8mgpl in Zinc Electrolyte and how it can be reduced to below 0.4mgpl?

G V V Satyanarayana
Employee - Visakhapatnam, India

What do you mean by electrolysis? Are you doing electroplating? There are at least 3 major types of electrolytes: acid, cyanide, alkaline non-cyanide. Please post your actual situation. Thanks.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: