Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Coatings for Stainless Steel

I am looking for ways to deposit materials onto stainless steel. Any information on the subject would be appreciated. Mark

Mark Fritz
instrument company - Denver Colorado
1999

1999

Hi Mark. In most cases you need to start with a Wood's Nickel Strike or a Sulphamate Nickel Strike because stainless steel is so passive that you must simultaneously activate it and plate onto it. Please search for "Wood's Nickel Strike" and you'll find links to numerous letters here. For additional detail try the books listed in our 'must-have' list.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: