No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

What chemical is used in etching stainless steel back of watches?

We are doing a business of etching on back cover of watches but our etching result is not so good. So I want a good result. I want to know which chemical will give me good result

KAPIL P PARAJIYA
graphic production - AHMEDABAD, GUJARAT, INDIA
2005

Try 35% ferric chloride ⇦ this on eBay or Amazon [affil links] at about 45C. However, it depends on the type of stainless steel and what treatments it has had.

Trevor Crichton
R&D practical scientist
Chesham, Bucks, UK
2005

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: